Development, compounding, filling and finishing happen under one roof and one standard. Every batch is produced against the sample you approved, with records that let us trace what went into it.
Produced by Guangzhou Laiyue Biotechnology Co., Ltd. · 10,000 m² facility, Huadu, Guangzhou, China · ISO 22716 certified
Laiyue Biological plant — Huadu, Guangzhou
2005Manufacturing since
10,000 m²Integrated facility
100,000Cleanroom class
10Automated lines
01 Capabilities
Seven stages, one facility
From a single litre of trial compound to a full production run, the process is the same — only the scale changes. The facility runs ten automated lines and more than fifty automated equipment units across a Class 100,000 cleanroom.
01 Capability
Fragrance Laboratory
Formulas are built and adjusted on the bench, where small variations can be tested and smelled immediately. This is where a brief becomes a structure — top, heart and base — and where a reference fragrance is analysed and rebuilt in a direction of your own.
02 Capability
Fragrance Blending
Approved formulas are weighed and blended to a controlled procedure. Each component is measured by mass, not volume, and the batch is held for maceration so the composition settles before filling — the difference between a good trial and a consistent product.
03 Capability
Bottle Filling
Filling is calibrated to your declared volume, then the pump and collar are crimped and the unit sealed. Fill weight, neck finish and spray performance are checked at the start of the run and at intervals throughout it.
04
Raw Material Selection
Essential oils, absolutes, resins and aroma materials are selected for olfactive quality and supply reliability, then stored and handled to preserve them.
05
Fragrance Development
Brief interpretation, formula creation and refinement across smelling rounds, with adjustments documented at each version.
06
Packaging & Assembly
Bottles are assembled with caps, collars and cartons, then packed into shippers configured for export handling.
07
Quality Inspection
Liquid clarity, colour, fill level, seal integrity, spray function and label placement are checked against the approved sample.
02 Production route
How a production run moves
Approval points are placed before cost is committed, so a change of direction early stays inexpensive.
01
Brief
Market, positioning, volume and target cost are agreed and written down.
02
Formula
Development and refinement until the scent is approved on blotter and on skin.
03
Components
Bottle, closure and carton are sourced and confirmed against your artwork.
04
Approval
Physical pre-production sample is signed off as the reference standard.
05
Production
Compounding, maceration, filling, assembly and inline inspection.
06
Dispatch
Final inspection, export packing and release of shipment documentation.
03 Documentation
Paperwork that matches the product
Brand owners in the United States and Europe need documentation they can file, not assurances. We prepare the records that accompany a shipment and confirm, before production, which market requirements apply to your specific formula and pack.
Formula specification sheet
Safety data sheet (SDS)
IFRA conformity statement
Certificate of analysis (COA)
Batch and fill records
Artwork and print proofs
Certification, stated precisely
The facility operates under ISO 22716:2007 cosmetics Good Manufacturing Practices, certified by Bureau Veritas, and is audited against the cosmetics GMP guidelines published by the US FDA.
That second point is an audit against published guidance — not an FDA registration or an FDA approval. The distinction matters, and it is worth checking when any supplier claims to be “FDA approved”.
Certificates, the cosmetics manufacturing licence and the batch records for your run are available on request, and scans accompany every quotation pack.
Certificates are issued to the manufacturing company that runs this facility — not to a trading intermediary that passes the order on. Ask for the scans and check the numbers yourself before you commit.
ISO
ISO 22716:2007
Cosmetics Good Manufacturing Practices, covering production, quality management, documentation and traceability across the whole process.
Certified by Bureau Veritas Certification
GMP
Cosmetics GMP (FDA guidelines)
Audited against the cosmetics GMP guidelines published by the US FDA. This is an audit against published guidance — not an FDA registration, and not an FDA approval.
Certified by Bureau Veritas Certification
Licence
Cosmetics Manufacturing Licence
Production licence for the categories manufactured on site, issued alongside the company's business registration.
Guangdong Medical Products Administration
What we do not claim. We hold no FDA registration, no “FDA approval”, and no certification beyond those listed above. Where a destination market requires something we do not hold, we tell you before the project starts rather than after the purchase order.
05 Research & quality
Development verified before it is scaled
Compounding vessel — bulk scale
Before a formula goes to bulk it is put through stability work: heat, cold, microbiological challenge and compatibility with the pack it will live in. A scent that is beautiful on a blotter but separates at 40 °C is a problem you discover in a warehouse months later, not in a laboratory.
Process water is produced on site through softening, filtration, reverse osmosis and ultrapure treatment. Every run carries its own batch record — process parameters, in-process checks, retained samples and traceability from material to shipment.
Heat and cold stability cycles
Microbiological testing
Formula-to-pack compatibility
Retained samples per batch
Ultrapure process water
Environmental monitoring in clean areas
Ten granted patents
Three invention patents covering proprietary formulation work and seven utility models covering production and laboratory equipment designed in-house — including a filling machine built for fill stability and a homogeniser developed for laboratory use.
Material sourcing
Fragrance compounds and raw materials through suppliers in Japan, Korea and Europe, including BASF and Dow, with technical cooperation from two research institutes in Guangdong.
Also on site
R&D and sample development, quality control with retained samples, sample and packaging showrooms, and warehousing — coordinated under one roof so a project does not lose days in transit between suppliers.
Visit the process
Want to see how your product would be made?
Share your brief and we will walk you through the route — from the laboratory bench to the sealed shipper — including where your approvals sit.
Or come and see it. The plant is in Huadu, Guangzhou, about 20 minutes from Baiyun International Airport, with meeting space and a packaging showroom on site. Tell us your travel dates and we will arrange a time.